Fatigue Management at Work: What Australian Employers Must Do
Fatigue is a WHS risk like any other. Here's what the law expects, the new national Code of Practice, state differences, and practical controls that work.
In August 2022, a 27-year-old delivery driver named Rohallah Khashee drifted across double white lines on the Goulburn Valley Highway and hit an oncoming truck. He died at the scene. He'd been doing overnight runs of around 800 kilometres, with up to two dozen drops a night, for a Keysborough warehousing and logistics company.
In September 2025, the company and its sole director were convicted and fined a combined $1.43 million. WorkSafe Victoria said it was reasonably practicable for them to make sure he didn't work more than 12 hours in a 24-hour period without a proper break.
Most businesses only think seriously about fatigue after something like that. The law expects you to think about it before.
Fatigue is a WHS risk like any other
There's no separate "fatigue law" for most workplaces. Fatigue sits inside the general duty every PCBU (person conducting a business or undertaking) already has: to make sure, so far as is reasonably practicable, that workers and others aren't exposed to risks to their health and safety.
In practice that means treating fatigue the way you'd treat any other hazard. Work out what causes it in your business, how bad it could get, what you can change, and check later that the changes worked.
Workers have a duty too. They need to take reasonable care, which includes turning up fit to work and speaking up when they're not. But the biggest levers (hours, rosters, workload, breaks) belong to the employer, and that's where a regulator will look first.
There's now a national Code of Practice
In September 2025 Safe Work Australia released a model Code of Practice, Managing the risk of fatigue at work. It replaces the old 2013 guide as the main national reference and goes into real detail on shift design, breaks, task demands and the work environment.
A model code only becomes legally "approved" once a state or territory adopts it. So far that's happened in Tasmania (from 28 January 2026), New South Wales (from 20 February 2026) and the Northern Territory (March 2026).
If you're somewhere else, don't ignore it. It's still the clearest statement of what regulators think "reasonably practicable" looks like for fatigue. NSW has gone further: since 1 July 2026, a new section 26A of its WHS Act treats approved codes as the minimum standard PCBUs are expected to meet.
It's a psychosocial hazard too
Fatigue overlaps with psychological health. The national fatigue code is designed to sit alongside the Managing psychosocial hazards at work code. The Commonwealth's own psychosocial code goes further and names fatigue outright as a common psychosocial hazard, with examples like long shifts and not enough recovery time between them.
So if you've started a psychosocial risk register, fatigue belongs on it. (If you haven't, our guide to psychosocial hazards for employers is a good place to start.)
Where the states differ
Victoria doesn't use the model WHS laws. Employers there have duties under the Occupational Health and Safety Act 2004, and since 1 December 2025 the OHS (Psychological Health) Regulations 2025 set out specific steps for psychosocial hazards. WorkSafe Victoria covers work-related fatigue as part of its psychological health guidance.
Western Australia has its own WHS laws and two relevant codes from WorkSafe WA: Working hours (2006) for general guidance and Fatigue management for commercial vehicle drivers (2019).
Heavy vehicles are their own world. The Heavy Vehicle National Law fatigue rules (standard hours, BFM and AFM) apply in Queensland, NSW, Victoria, SA, Tasmania and the ACT. WA and the NT run their own driver fatigue schemes, which catches out a lot of cross-border operators.
What actually causes fatigue at work
The national code groups the hazards into work hours, tasks, equipment, environment and individual factors. On the ground, that usually looks like:
- long or irregular hours, overtime and on-call work that quietly becomes normal
- night shifts, early starts and quick changeovers between shifts
- breaks that exist on paper but don't get taken
- work that needs sustained concentration, or is physically heavy or repetitive
- heat, cold, noise, vibration and poor lighting
- long commutes, travel and FIFO rosters
- things outside work, like a new baby, a second job or caring for a family member
You can't control that last group, but you still have to manage how it interacts with the work.
Controls that work
The controls that make a real difference change the work itself, rather than asking people to push through:
- Set limits on shift length, consecutive shifts and overtime, and actually hold to them when things get busy.
- Leave enough time between shifts for people to travel home and get a full night's sleep.
- Schedule breaks and make sure they're taken.
- Plan safety-critical tasks away from the early-morning low point where you can.
- Rotate tasks that are physically or mentally draining.
- Make it normal to say "I'm not fit for this" without being penalised for it.
- Talk to your workers and HSRs about rosters and workloads. Consultation is a legal requirement, not a courtesy.
- Train supervisors to recognise fatigue and know what to do when they see it.
And keep the paperwork: rosters and actual hours worked, your risk assessment, fatigue reports and what you did about them, and training records.
Common questions
Is fatigue management training mandatory?
For most workplaces there's no specific "fatigue certificate" required by law. But information, training and instruction are part of your general WHS duty, and training is one of the clearest ways to show you've taken fatigue seriously. Heavy vehicles and rail have their own specific requirements.
Does fatigue from outside work count?
It still affects safety at work, so yes, in the sense that you have to manage it. You can't control someone's life outside work, but you can have a fitness-for-work policy, encourage people to report, and adjust duties when someone isn't fit.
Does an online course cover heavy vehicle fatigue accreditation?
No. Heavy vehicle operators need training that meets their scheme, whether that's BFM or AFM under the HVNL or the WA and NT driver fatigue rules. A general workplace fatigue course covers the WHS fundamentals, but it doesn't replace scheme-specific accreditation.
Where to start this week
- Pull last month's rosters and look for the longest stretches people actually worked, including overtime.
- Ask your team, anonymously if you need to, where fatigue shows up in their job.
- Pick the worst one or two and change the work, not just the instructions.
- Write down what you found and what you changed.
That alone puts you well ahead of where most small businesses are.
Sources
- Safe Work Australia: New model Code of Practice: Managing the risk of fatigue at work
- WorkSafe Victoria via OHS Reps: Company and director fined $1.43M for fatal crash of fatigued driver
- WorkSafe Tasmania: Managing the risk of fatigue at work
- SafeWork NSW: Codes of practice
- WorkSafe Victoria: Psychological health
- WorkSafe WA: Fatigue management for commercial vehicle drivers
Related training

Fatigue Management Training
Understand the risks of workplace fatigue, your legal duties under WHS law, and practical strategies to keep your team safe and alert. Certificate included.